Cisco SGE2010P

Cisco SGE2010P 48 Port 10/100/1000 Stackable Switch with PoE

The Cisco SGE2010P Managed switch with WebView allows you to expand your network securely. Configuration of the switch is secured using SSL for Web access. The SGE2010P is optimized for maximum system availability with fully-redundant stacking, redundant power options, and dual images for resilient firmware upgrades.

Cisco SGE2010P Product Overview

The Cisco® SGE2010P 48-Port Gigabit Switch (Figure 1) allows you to expand your network securely. Web-based configuration of the switch is secured using SSL. The Cisco SGE2010P is optimized for maximum system availability, with fully redundant stacking, redundant power options, and dual images for resilient firmware upgrades. These Cisco switches help secure the network through IEEE 802.1Q VLANs, IEEE 802.1X port authentication, access control lists (ACLs), denial-of-service (DoS) prevention, and MAC-based filtering. The enhanced quality of service (QoS) and traffic-management features help ensure clear and reliable voice and video communications.

For wireless or voice over IP (VoIP) deployments, the Cisco SGE2010P supports the IEEE 802.3af standard for Power over Ethernet (PoE). Automatic load sensing enables the circuitry to detect PoE on the end device before providing power. For safety, each port has independent overload and short-circuit protection, along with LED indicators to show power status. It provides 15W of available PoE power on up to 24 of the Gigabit Ethernet ports for powering PoE-enabled wireless access points or VoIP handsets. The maximum PoE available per device for all ports is 360W.

The Cisco SGE2010P provides resilient stacking for up to four units, or 192 ports. A stack of units is managed as a single switch with one web management interface. The Cisco SGE2010P can coexist in a stack with the Cisco SGE2000 and SGE2000P 24-Port Gigabit Switches, and the Cisco SGE2010 48-Port Gigabit Switch, for a maximum of 192 ports in a stack. The stacking capability includes master/backup unit behavior, ring and chain architecture, and hot insertion and removal of units.

Software running on the Cisco SGE2010P interacts with provisioning, management, and security software on both the site's services router and the service provider's equipment. This interaction provides a simple, one-step installation and access to web-administered features for the administrator and users. Simple, affordable network operations throughout the network's lifetime are the result.

Cisco SGE2010P Features:

Forty-eight 10/100/1000 Ethernet ports

4 mini Gigabit Interface Converter (mini-GBIC) slots (shared with 4 Ethernet ports) for fiber Gigabit Ethernet expansion

IEEE 802.3af PoE delivered over any of the forty-eight 10/100/1000 ports

15.4W available power to a Gigabit Ethernet port for PoE-enabled wireless access point or VoIP handsets (maximum per-device PoE delivery of 360W available for all ports)

Dual images for resilient firmware upgrades

96 Gbps nonblocking, store-and-forward switching capacity

Simplified QoS management using 802.1p, differentiated services (DiffServ) or type of service (ToS) traffic prioritization

Power redundancy when used with the Cisco RPS1000 380W Redundant Power Supply Unit

Fully resilient stacking provides optimized growth with simplified management

ACLs for granular security and QoS implementation

Configuration and monitoring from a standard web browser

Secure remote management of the switch via Secure Shell (SSH) and SSL encryption

802.1Q-based VLANs enable segmentation of networks for improved performance.

Click here for a Cisco SGE2010P Datasheet

Didn't find the network switch you were looking for?

Check out these other Cisco switches:

• Cisco SFE2010P
• Cisco SGE2000P
• Cisco SGE2010