Netgear FS726TP

Netgear ProSafe FS726TP 24 Port 10/100 Smart Switch

This PoE capable Smart Switch, FS726TP, provides power and data over the same Cat-5 cable to enable affordable PoE solutions for mid-sized businesses. Using built-in standards based IEEE 802.3af PoE, the FS726TP offers web-based management including prioritization and SNMP making it ideal for deploying access points, VoIP phones and IP-based surveillance cameras. Two built-in Gigabit ports provides fast connections to servers or a Gigabit-speed backbone.

Netgear ProSafe FS726TP 24 Port 10/100 Smart Switch with 8.8Gbps Bandwidth

Network Protocol and Standards Compatibility:

• IEEE 802.3 10BASE-T
• IEEE 802.3u 100BASE-TX
• IEEE 802.3ab 1000BASE-T
• IEEE 802.3z 1000BASE-X
• IEEE 802.3x full-duplex flow control
• IEEE 802.3af (Power over Ethernet)

Power Supply

• Power Consumption: 122W maximum
• 100-240VAC/50-60 Hz universal input
• PoE Budget: 100W

Network Ports

• 24 10/100 Mbps auto sensing Fast Ethernet
• 2 10/100/1000 Mbps auto-sensing Gigabit Ethernet switching ports (RJ-45)
• 2 SFP slots

Physical Specifications

• Dimensions (W x D x H): 440 x 205 x 43 mm (17.8 x 8.1 x 1.6 in.)
• Weight: 3.0 kg (6.6 lb)

Electromagnetic Emissions

• CE mark, commercial
• FCC Part 15 Class A
• VCCI Class A
• C-Tick

LEDs

• Per port: (10/100 and Gigabit): Link/ Activity, Speed
• Per device: Power
• Per PoE ports: PoE Power, PoE fault

Electromagnetic Immunity

• EN 55024

Safety

• CE mark, commercial
• cUL IEC950/EN60950

Administrative Switch Management

• IEEE 802.1Q Static VLAN (Up to 64)
• Port-based VLAN (Up to 26)
• IEEE 802.1p Class of Service (CoS)
• Port-based QoS
• DSCP – Layer 3 QoS
• IEEE802.3ad (manual) Link Aggregation
• IEEE 802.1D Spanning Tree Protocol
• RFC 1157 SNMP v1
• RFC 1213 MIB II
• RFC 1643 Ethernet Interface MIB
• RFC 1493 Bridge MIB
• RFC 2131 DHCP client
• Private Enterprise MIB
• Rate Limiting
• Static IGMP and IGMP Snooping v1
• Port Mirroring Support
• Web-based configuration
• Configuration Backup/Restore
• Password Access Control
• Firmware upgradeable

Performance Specifications

• Forwarding modes: Store-and-forward
• Bandwidth: 8.8 Gbps
• Network latency: <20µs for 64-byte frames in store-andforward mode for 100 Mbps to 100 Mbps transmission
• Buffer memory: 256 KB embedded memory per unit
• Address database size: 8,000 media access control (MAC) addresses per system
• Addressing: 48-bit MAC address
• Mean time between failure (MTBF): 327,000 hours (~37 years)
• Acoustic Noise: 41.8 dB

Modules

• AGM731F 1000BASE-SX SFP Module
• AGM732F 1000BASE-LX SFP Module
• AGM733 1000BASE-ZX SFP Module

Warranty

• NETGEAR Lifetime Warranty†

ProSupport™ Service Packs Available

OnCall 24x7, Category 1

• PMB0331-100 (US)
• PMB0331 (non-US)

XpressHW, Category 1

• PRR0331

Package Contents

• 24-port Smart Switch with Gigabit Ports (FS726TP)
• Rubber footpads
• Power cord
• Rack-mount kit
• Resource CD
• Installation guide
• Warranty/support information card

NETGEAR Related Products

• 32-bit PCI Copper Gigabit Adapter (GA311)
• 1000BASE-SX SFP Module (AGM731F)
• 1000BASE-LX SFP Module (AGM732F)
• 1000BASE-ZX SFP Module (AGM733)