Netgear FS116P

Netgear FS116P ProSafe 16-port 10/100 Desktop Switch with 8-port PoE

The Netgear ProSafe FS116P is a 16 port 10/100 desktop switch with 802.3af PoE on 8 ports.

Netgear FS116P Product Overview

The ProSafe FS116P provides power and data from a single point, using Power over Ethernet (PoE) over a single Cat-5 cable. The sixteen Fast Ethernet ports can be used for any 10/100 Mbps link and eight of these ports can supply industry-standard IEEE 802.3af power. Advanced auto-sensing algorithm gives power only to 802.3af end devices, so no need to worry about damaging proprietary PoE or non-PoE equipment. In addition, it discontinues the power when PoE devices are disconnected. Easy and reliable, the ProSafe FS116P automatically determines PoE requirements, speed, duplex, and cable type using AutoUplink™.

The affordably priced ProSafe FS116P delivers PoE to any small business network that wants to simplify the installation of wireless access points and IP-based surveillance cameras. These unmanaged Netgear Switches are optimally installed on a ceiling or high on a wall, away from most electrical outlets. PoE eliminates the requirement for a dedicated electrical outlet to power these devices. This allows for flexibility in situating devices where AC power is difficult to access and lowers installation costs. Compact and flexible, the ProSafe FS116P is ideal for small business network that want to inexpensively use PoE to deploy wireless access points and IP-based network surveillance cameras.

Netgear FS116P Specifications

Network Ports

• 16 auto speed-sensing 10/100 Mbps RJ-45 ports

Network Protocol and Standards

• IEEE 802.3i 10BASE-T
• IEEE 802.3u 100BASE-TX
• IEEE 802.3x Flow Control
• IEEE 802.3af DTE Power via MDI

Performance Specifications

• Forwarding modes: Store-and-forward
• Bandwidth: 3.2 Gbps
• Network latency: Less than 20 µs for 64-byte frames in store-and-forward mode for 100 Mbps to 100 Mbps transmission
• Buffer memory: 96 KB embedded memory per unit
• Address database size: 1,000 media access control (MAC) addresses per system
• Addressing: 48-bit MAC address
• Mean Time Between Failure (MTBF): 116,009 hours (~ 13 years)
• Acoustic noise: 0 dB

Status LEDs

• System: Power, PoE Maximum Power
• Per Port: Link, Activity, Speed, PoE Active, PoE Status

Power Supply

• Total Power Consumption: 72W maximum
• Total PoE Power Budget: 51W maximum
• 802.3af power consumption: 55W maximum (ports 1 – 8)
• 48V DC; plug is localized to country of sale

Physical Specifications

• Dimensions (W x D x H): 11.3 x 4.1 x 1.1 in. (287 x 103 x 27 mm)
• Weight: 0.9 kg (2.0 lb)

Environmental Specifications

• Operating temperature: 32° to 104°F (0° to 40° C)
• Storage temperature: 14° to 158°F (-10° to 70°C)
• Operating humidity: 90% maximum relative humidity, non-condensing
• Storage humidity: 95% maximum relative humidity, non-condensing
• Operating altitude: 10,000 ft (3,000 m) maximum
• Storage altitude: 10,000 ft (3,000 m) maximum

Electromagnetic Emissions

• CE mark, commercial
• FCC Part 15 Class A
• VCCI Class A
• EN 55022 (CISPR 22), Class A
• C-Tick

Electromagnetic Immunity

• EN 55024

Safety

• CE mark, commercial
• CE/LVD EN60950

Warranty

• Switch: NETGEAR Lifetime Warranty†
• Power supply: NETGEAR 2-year Warranty

ProSupport Service Packs Available

OnCall 24x7, Category 1

• PMB0331-100 (US)
• PMB0331 (non-US)

XPressHW, Category 1

• PRR0331

Package Contents

• ProSafe 16-port 10/100 Switch with Power over Ethernet (FS116P)
• AC Adapter
• Wall-mount kit
• Installation guide
• Warranty/support Information card

NETGEAR Related Products

• ProSafe 802.11g Wireless Access Point (WG302)
• ProSafe 802.11g Wireless Access Point (WG102)
• NIC 10/100 Low Profile PCI Network Interface Card (FA311)